Podaci o nacrtu

Oznaka:prEN 15273-3
Odbor:HZN/TO 528
Ime odbora:Oprema za željeznice
Nacrt objavljen za komentiranje:2018-12-12
Rok za komentiranje:2019-03-04
Broj komentara:0
Contact email:nacrti(at)hzn.hr
Područje primjene nacrta:

This standard:
— defines the various profiles needed to install, verify and maintain the various infrastructures near the infrastructure gauge;
— lists the various phenomena to be taken into account to determine the infrastructure gauge;
— defines a methodology that may be used to calculate the various profiles from these phenomena;
— lists the rules to determine the distance between the track centres;
— lists the rules to be complied with when building the platforms;
— lists the rules to determine the pantograph gauge;
— lists the Formulae needed to calculate the infrastructure gauge.
and is applicable for various track gauges.
This standard defines the gauge as an agreement between infrastructure and rolling stock, and defines the responsibilities of the following parties:
a) for the infrastructure:
1) gauge clearance;
2) maintenance;
3) infrastructure monitoring.
b) for the rolling stock:
1) compliance of the operating rolling stock with the gauge concerned;
2) maintenance of this compliance over time.
For a given defined gauge, the application of the rules contain in this part 3, associated with useful elements contained in EN 15273-4, makes it possible to determine the minimum dimensions of an infrastructure. Therefore, this infrastructure is compatible with vehicle gauge having the same designation, and obtained according to rules defined in EN 15273-2.
Other networks such as urban and suburban may apply the gauging rules defined in this standard but are outside of its scope.
For absolute and comparative gauging, the application of the rules contained within EN 15273-3, combined with vehicle data defined in EN 15273-2 in accordance with EN 15273-1 make it possible to determine the dimensions of infrastructure.
NOTE The rules given in this standard are not applicable to the gauges “S” and “T” referred to in clause 4.2.3.1. (7) ; & (8) for track gauge 1520 mm of the merged TSI Loc and Pass ( Commission Regulation N° 1302/2014 of 18 November 2014).

Sustav komentiranja nacrta norma – Sufinancirale Europska unija i EFTA    

HZN snosi isključivu odgovornost za ovu aplikaciju. Europska unija ne odgovara za upotrebu informacija koje su u njoj sadržane.