Pregled nacrta
Odbor: HZN/TO 578
(Elektronička javna nabava)
Ustanova izvornika:
Rok za komentiranje: 2026-03-23
The document describes the transactions for pre-award processes between Contracting Entities (Buyer) and Economic Operators (Seller), where the Buyer seeks to establish a contract for the procurement of products, services, or works. The various possible behaviours of Buyers and Sellers are represented through choreography variants as described in prEN 17014-2:2025 [7].
This document specifies the transactions described by the choreography variants and captures their specific functional and informational aspects. The transactions are grouped along the following collaborations which are applied in pre-award choreographies:
— Procurement procedure subscription
— Procurement documents access
— Tender submission
— Procurement documents questions and answers
— Tender clarification
— Tender withdrawal
— Notify awarding
— Tendering message response
— Tenderer qualification
— Qualification response
— Invitation to tender
For each transaction, the document specifies the underlying business and information requirements, including the functional and procedural objectives the transaction must fulfil, the structure and semantics of the related data, and the governing business rules ensuring valid execution. In addition, all defined data elements are aligned with the eProcurement Ontology (ePO) to achieve semantic interoperability and consistent representation across procurement systems.
This document is linked to Directive 2014/24/EC on public procurement [8], Directive 2014/25/EC on procurement by entities operating in the water, energy, transport and postal services sectors [9], Directive 2014/23/EC on the award of concession contracts [10] and Directive 2009 /81/EC on the coordination of procedures for the award of contracts in the fields of defence and security [11]. Implementing Regulation (EU) 2019/1780 establishing standard forms for the publication of notices [eForms] [12] and Implementing Regulation (EU) 2016/7 establishing the standard form for the European Single Procurement Document [ESPD] [13] are supplementary regulations that are relevant to this document.
The identifier of this choreographies document is EN 17014-1:2026.
Odbor: HZN/TO 578
(Elektronička javna nabava)
Ustanova izvornika:
Rok za komentiranje: 2026-03-23
This document describes the transaction information requirements of the transactions used in the basic collaborations described in EN 17017-1:2025, Electronic Public Procurement - Fulfillment - Choreographies. For each transaction there is an overview, the transaction business requirements and the transaction information requirements model containing definitions of terms, usage descriptions and cardinality of the information elements.
The document describes the following transactions:
a) Despatch Advice;
b) Receipt Advice.
The identifier of this transactions document is CEN/EN 17017 2:20xx.
How to claim compliance to a transaction is described in Clause 6.
Odbor: HZN/TU A1
(Usluge, proizvodi za kućanstvo i slobodno vrijeme 1)
Ustanova izvornika:
Rok za komentiranje: 2026-03-23
This document provides guidance for setting up and operating a service providers prequalification, qualification, or shortlisting process.
This document is applicable to:
a) organizations which provide list of prequalified, qualified or shortlisted service providers;
b) any interested parties who are directly or indirectly involved in or affected by a service providers prequalification, qualification, or shortlisting process.
This document is not applicable to business-to-consumer (B2C) service contracts or for works contracts.
NOTE 1 “Works contracts” are contracts that have as their object the execution, or both the design and execution, of a work and are not covered in this document. Contracts having as their object only the design of a work are covered.
NOTE 2 “Work” means the outcome of building or civil engineering works taken as a whole which is sufficient in itself to fulfil an economic or technical function.
This document is also not applicable for contracts covering employment arrangements (be they of formal or informal nature).
Odbor: HZN/TO 555
(Medicinski proizvodi)
Ustanova izvornika:
Rok za komentiranje: 2026-03-24
Specifies the requirements and the relevant tests for sterilizers intended to be used for the terminal sterilization of health care products (medical devices or medicinal products) presented as aqueous liquid in sealed containers. The container can be rigid, semi rigid or flexible. The sterilizing agent, moist heat, is created internally from the product, heating being achieved by use of saturated steam, mixtures of steam and a pressure ballasting non-condensing gas such as air or super-heated water in the sterilizer chamber. The sterilizers can be used in both a health care and industrial setting.
This standard does not apply to sterilizers using saturated steam for the sterilization of the surfaces of medical devices or sterilizers used in laboratories.
NOTE 1 Sterilizers using saturated steam for sterilizing the surfaces of medical devices are covered by EN 285 and EN 13060. Laboratory sterilizers are covered by some national standards.
NOTE 2 Sterilizers conforming to NWIP ISO XXXXX can also be used for the sterilization of other aqueous liquid in sealed containers such as veterinary products or some foodstuffs.
Note 3 Sterilizers conforming to NWIP ISO XXXXX can also be used for the sterilization of a contained product enclosed within a sterile barrier system conforming to the EN ISO 11607 series of standards.
Odbor: HZN/TO 159
(Ergonomija)
Ustanova izvornika:
Rok za komentiranje: 2026-03-24
ISO/IEC 25063:2014 describes the Common Industry Format (CIF) for context of use descriptions and specifies the contents of both high-level and detailed descriptions of the context of use for an existing, intended, implemented or deployed system. A context-of-use description includes information about the users and other stakeholder groups, the characteristics of each user group, the goals of the users, the tasks of the users, and the environment(s) in which the system is used.
The context of use description is applicable to software and hardware systems, products or services (excluding generic products, such as a display screen or keyboard). It is important to gather and analyse information on the current context in order to understand and then describe the context that will apply in the future system. The context of use description provides a collection of data relevant for analysis, specification, design and evaluation of an interactive system from the perspective of the various user groups and other stakeholders.