Pregled nacrta

This document specifies three methods for the determination of the density of non-cellular plastics in the form of void-free moulded or extruded objects, as well as powders, flakes and granules.
— Method A: Immersion method, for solid plastics (except for powders) in void-free form.
— Method B: Liquid pycnometer method, for particles, powders, flakes, granules or small pieces of finished parts.
— Method C: Titration method, for plastics in any void-free form.
NOTE Density is frequently used to follow variations in physical structure or composition of plastic materials. Density can also be useful in assessing the uniformity of samples or specimens. Often, the density of plastic materials depend upon the choice of specimen preparation method. When this is the case, precise details of the specimen preparation method are intended to be included in the appropriate material specification. This note is applicable to all three methods.

This document specifies requirements for the periodic inspection, examination and testing of offshore freight and service containers, built in accordance with ISO 10855‑1, with maximum a gross mass not exceeding 25 000 kg and their associated lifting sets, intended for repeated use to, from and between offshore installations and ships. Inspection requirements following damage and repair of offshore containers are also included.

Recommended knowledge and experience of staff responsible for inspection of offshore containers is given in Annex B.

Recommended knowledge and experience of staff responsible for inspection of lifting sets intended for use with offshore containers is given in Annex C.

This document is applicable to 2-way or multi-way ball valve manufactured with thermoplastic materials to be used for the transport of pressurized water whether or not intended for human consumption (domestic systems) for applications in buildings and utility branches.
              NOTE The two-way valve is generally used for sectioning and control, the multi-way one to divert or mix the flows; information on their functionality can be       
                 found in Appendix B information of ISO 16135.
 
The application classes are indicated in the relevant hot and cold water system standards.
This document defines the dimensions necessary for the assembly of the valves, ensuring its
interchangeability and defines its physical and mechanical requirements.

This document specifies requirements for the design, manufacture and marking of offshore containers with a maximum gross mass not exceeding 25 000 kg, intended for repeated use to, from and between offshore installations and ships.

This document specifies only transport-related requirements.

This document specifies requirements for lifting sets for use with containers in offshore service, including technical requirements, marking and statements of conformity for single and multi-leg slings, including chain slings and wire rope slings.

As per ISO document i.e.
This document specifies three methods for the determination of the bulk density of granular 
refractory materials (grain density) having a grain size larger than 2 mm:
— Method 1: mercury method with vacuum;

— Method 2: arrested water absorption method;
— Method 3: vacuum method with spin dryer option according to ISO 5017.
Method 1 is intended as the reference method.

NOTE  Depending on the nature of the material tested, the three methods can give different results. 
Any statement of the value of a bulk density can therefore be accompanied by an indication of the 
method used or to be used in case of dispute.

The same method can be used for the determination of the volume of the sample, for selecting and 
preparing the sample, for
calculating the bulk density and for presenting the test report.

This document specifies the required characteristics and tests applicable to female electrical contacts 005, type A, crimp, class T, used in elements of connection according to EN 3155 002.
It is used together with EN 3155 001.
The associated male contacts are specified in EN 3155 004.
The contacts specified by this standard are applicable for connector classes specified in EN 2997 series.
This document specifies two contact types (F and H) depending on connector class.

This document specifies the required characteristics, tests and tooling applicable to male electrical contacts, type A, crimp, class S, used in elements of connection according to EN 3155 002.
It is used together with EN 3155 001.
The tests as applied in this standard do not permit the full qualification and shall be completed with associated components.

This document specifies the performances and contact arrangements groups for bayonet coupling circular connectors, intended for use in an operating temperature range of −65 °C to 175 °C or 200 °C continuous.

This document specifies the dimensions, linear resistance, mechanical characteristics, construction and mass of conductors in aluminium or aluminium alloy for electrical cables for aerospace applications.
It applies to stranded conductors with nominal cross-sections of 5 mm2 to 115 mm2 inclusive.

This document specifies general requirements and gives guidelines for ventilation systems except for industrial, medical and laboratory facilities.
This document also specifies cleanliness criteria and procedures necessary in assessing and maintaining the cleanliness of ventilation systems over their lifetime from design and installation to maintenance.
This document applies to both new and existing ventilation systems with, and without, air conditioning and kitchen extract systems.

This European Standard specifies performance levels and test methods for the following characteristics of slide fasteners made from interlocking components mounted on tapes: strengths of puller attachment, closed-end, top stop, open-end slide fastener box, reciprocating mechanism, closed slide fastener when extended laterally, open-end attachment when extended laterally, slider locking device, and open-end slide fastener single stringer slider retention and slider resistance to torque.
NOTE The tests specified in Annexes B to K have been specifically devised to permit their direct application to finished slide fasteners with a view to giving the user reasonable assurance that a slide fastener conforming to the requirements of this standard can satisfactorily fulfil its intended purpose. Annex L gives information about sampling procedures for bulk quantities of slide fasteners.
In addition, performance levels are also specified for colour fastness to washing, dry cleaning and water, and for dimensional stability to washing and dry cleaning.
This European Standard is applicable to slide fasteners for general use and is not applicable to slide fasteners for specialist purposes (for example: pressure sealed slide fasteners for diving suits).

ISO 11357-3:2018 specifies a method for the determination of the temperatures and enthalpies of melting and crystallization of crystalline or partially crystalline plastics.

This document provides guidelines for the characterization of waterlogged archaeological wood to support decision-making processes for its preservation.
This document can be applied for the management of wood discovered on waterlogged sites (e.g. terrestrial, aquatic (marine and freshwater)), as a basis for designing controlled reburial, in-situ preservation, post-excavation storage and conservation strategies. In the case of composite artefacts made of wood and other materials, this document is applicable only for the wooden components. Methods for conservation, site protection and monitoring for reburial as well as in-situ preservation are beyond the scope of this document.

This document covers instrumental analysis by elemental analyser-isotope ratio mass spectrometry (EA-IRMS) of food materials to determine C and/or N isotope ratios.
The isotope ratios obtained by following this document are expressed as δ13C and/or δ15N values relative to international measurement standards.
Sample preparation is not included within this document. It is assumed that the food sample has been pre-treated as necessary and homogenized.
Similarly, the interpretation of the obtained isotope delta values is not covered by this document. Following this protocol will result only in isotope delta values for the sample materials.
Solid and/or liquid sample materials can be analysed following this document.
Although other instrumental techniques can be applied to determine δ13C and/or δ15N values in food materials, these other techniques are not covered by this document.

ISO 15883-7:2016 specifies the particular requirements for washer-disinfectors (WD) intended to be used for the cleaning and chemical disinfection, in a single operating cycle, of reusable items such as the following:
a) bedframes;
b) bedside tables;
c) transport carts;
d) containers;
e) surgical tables;
f) sterilization containers;
g) surgical clogs;
h) wheelchairs, aids for the disabled.
ISO 15883-7:2016 also specifies the performance requirements for the cleaning and disinfection of the washer-disinfector and its components and accessories which may be necessary in order to achieve the required performance.
Devices identified within the scopes of ISO 15883‑2, ISO 15883‑3, ISO I5883-4, and ISO 15883‑6 do not fall within the scope of this part of ISO 15883.
In addition, the methods are specified, as well as instrumentation and instructions required for type testing, works testing, validation (installation, operation, and performance qualification on first installation), routine control, and monitoring, as well as requalifications required to be carried out periodically and after essential repairs.
NOTE WDs corresponding to this part of ISO 15883 can also be used for cleaning and chemical disinfection of other thermolabile and reusable devices as recommended by the device manufacturer.
The performance requirements specified in this part of ISO 15883 may not ensure the inactivation or removal of the causative agent(s) (prion proteins) of Transmissible Spongiform Encephalopathies.

Deletion of the annex dealing with Statistical assessment of series produced equipment and section 7  "Compliance with this document".