Podaci o nacrtu

This document applies to the testing of surfaces that may become contaminated by radioactive materials.
The ease of decontamination is a property of a surface and an important criterion for selecting surface 
materials used in the nuclear industry, interim storage or disposal facilities from which contamination can 
be removed easily and rapidly without damaging the surface. The test described in this document is a rapid 
laboratory-based method to compare the ease of decontamination of different surface materials.
The results from the test can be one parameter to take into account when selecting surface coatings such 
as varnish or impervious layers such as ceramics and other surfaces. The radionuclides used in this test 
are those commonly found in the nuclear industry (137Cs, 134Cs and 60Co) in aqueous form. The test can also be adopted for use with other radionuclides and other chemical forms, depending on the customer requirements, if the solutions are chemically stable and do not corrode the test specimen.
The test does not measure the ease of decontamination of the surface materials in practical use, as this 
depends on the radionuclide(s) present, their chemical form, the duration of exposure to the contaminant 
and the environmental conditions amongst other factors.
The test method is not intended to describe general decontamination procedures or to assess the efficiency of decontamination procedures (see ISO 7503-1 to ISO 7503-3).
The test method is not suitable for use of radiochemicals if the radionuclide emits low energy gamma rays or beta particles that are readily attenuated in the surface.